Filters
Close

THE-VF G and HC

Strong, high quality finish. High airflow and very low initial pressure drop. Terminal filtration in air handling units for CLEANROOM applications. Hazardous and toxic contaminants extraction housings (asbestos, etc.)

GENERAL FEATURES

  • Efficiency EN1822: E10-H14
  • Media: Mini pleat fiberglass paper
  • Frame: Galvanized steel (G) or Stainless steel (1) with ergonomic handles
  • Sealant: Polyurethane
  • Separator: Continuous thermoplastic beads
  • Gasket: Half-round monobloc polyurethane
  • Final pressure drop: 600 Pa
  • Maximum Tº in continuous service: 80°C
  • Humidity: 70-80% RH

ADVANTAGES

  • Strong, high quality finish
  • High airflow
  • Very low initial pressure drop
  • Individual leak test on 0,3um at 0,45 m/s according to DIN 24.184 standard (from H13)
  • MPPS individual efficiency test on 12um at 0,45 m/s (scanning test) according to EN1822 standard
  • Individual test delivered with the filter
  • Double labeling for traceability
  • Tested for food contact according to CE 1935/2004
  • Certified for microbial development (ISO 846-VD 6022)

GENERAL FEATURES

  • Efficiency EN1822: E10-H14
  • Media: Mini pleat fiberglass paper
  • Frame: Galvanized steel (G) or Stainless steel (1) with ergonomic handles
  • Sealant: Polyurethane
  • Separator: Continuous thermoplastic beads
  • Gasket: Half-round monobloc polyurethane
  • Final pressure drop: 600 Pa
  • Maximum Tº in continuous service: 80°C
  • Humidity: 70-80% RH

ADVANTAGES

  • Strong, high quality finish
  • High airflow
  • Very low initial pressure drop
  • Individual leak test on 0,3um at 0,45 m/s according to DIN 24.184 standard (from H13)
  • MPPS individual efficiency test on 12um at 0,45 m/s (scanning test) according to EN1822 standard
  • Individual test delivered with the filter
  • Double labeling for traceability
  • Tested for food contact according to CE 1935/2004
  • Certified for microbial development (ISO 846-VD 6022)
*
*
*
*